Engenius EWS1025CAM AP Camera

    LIÊN HỆ BÁO GIÁ :


    Standards

    IEEE 802.11b/g/n on 2.4 GHz IEEE 802.11a/n/ac on 5 GHz IEEE 802.3at/af IEEE 802.11r IEEE 802.11k IEEE 802.11i IEEE 802.11x

    Antenna

    5dBi 5 GHz & 5dBi 2.4 GHz Internal High-Gain Antennas

    Physical Interface

    1 x 100/1000 Gigabit Ethernet Port – Supports 802.3at/af PoE Input 1 x Reset Button 1 x Power Connector 1 x Micro SD/SDXC Slot 24 Pcs IR LEDs 1x Embedded Microphone

    LED Indicators

    1 x Power 1 x 2.4 GHz 1 x 5 GHz 1 x Ethernet 1 x Mesh

    Power Source

    24V Proprietary Compliant Source 12VDC/1.5A Active Ethernet (PoE)

    Memory Capacity

    Micro SD/SDXC – (up to 64G)

    Image Sensor

    Sony 1 /2.9” 2-Megapixel Progressive Scan CMOS

    Lens

    Fixed Board Lens Fixed-Focus, f=2.8 mm / F2.0

    F.O.V.

    120° (diagonal)

    IR Illuminator

    24 Pcs LEDs, Up to 65 Feet

    Day/Night

    Removable IR-Cut Filter

    Minimum Illumination

    Color (IR-Off): 0.01 Lux / F2.0 B/W (IR-On): 0 Lux / F2.0

    Shutter Time

    1/2 sec. to 1/10,000 sec.

    Compression

    H.264/MJPEG

    Stream

    2x Video Streams

    Frame Rates

    Up to 30 FPS at 1920 x 1080P

    Image Settings

    Adjustable Image Size, Quality & Bit Rate

    Configurable

    Brightness Sharpness Contrast White Balance Saturation Exposure AGC/AWB/AES Flip & Mirror Time Stamp & Text Caption Overlay Auto/Manual Day & Night Mode 3D Noise Reduction Low Light Compensation (LLC)

    Audio Streaming

    1-Way

    Interface

    Built-In Microphone

    Wireless & Radio Specifications

    Dual-Concurrent Radio

    Operation Modes

    Mesh Access Point/Access Point Standalone: Access Point, Client Bridge, WDS Access Point, WDS Bridge, WDS Station

    Transmit Power

    Up to 15 dBm on 2.4 GHz Up to 15 dBm on 5 GHz Max transmit power is limited by regulatory power

    Radio Chains/Spatial Streams

    2 x 2:2

    Supported Data Rates (Mbps)

    2.4 GHz: Max 300 5 GHz: Max 867 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 300 (MCS0 to MCS15) 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS=1~2)

    Supported Radio Technology

    802.11b: Direct-Sequence Spread-Spectrum (DSSS) 802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM)

    Channelization

    802.11ac with 20/40/80 MHz channel width 802.11n with 20/40 MHz channel width 802.11a/b/g with 20 MHz channel width

    Supported Modulation

    802.11b: BPSK, QPSK, CCK 802.a/g/n: BPSK, QPSK, 16-QAM, 64-QAM 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

    Multiple BSSID

    Supports up to 16 SSIDs, 8 SSIDs per Radio

    VLAN Tagging

    Supports 802.1q SSID-to-VLAN Tagging VLAN Pass-Through

    Spanning Tree

    Supports 802.1d Spanning Tree Protocol

    QoS

    Compliant with IEEE 802.11e Standard WMM

    SNMP

    v1, v2c, v3

    MIB

    I/II, Private MIB Deployment Options Stand-Alone (Individually Managed) Managed Mode (with Neutron Series Switch/ezMaster)

    Stand-Alone Management Features

    Auto-Channel Selection Wireless STA (Client) Connection List Guest Network Fast Roaming (802.11k & 802.11r) Pre-Authentication (802.11i, 802.11x) PMK Caching (802.11i) RSSI Threshold Band Steering Traffic Shaping VLANs for Access Point – Multiple SSIDs Backup/Restore Settings Auto Reboot E-Mail Alert

    Wireless Management Features (with ezMaster & Neutron Switch)

    AP Auto Discovery and Provisioning AP Auto IP Assignment AP Cluster Management Remote AP Rebooting AP Device Name Editing AP Radio Settings Band Steering Traffic Shaping Fast Roaming (802.11k & 802.11r) Pre-Authentication (802.11i, 802.11x) PMK Caching (802.11i) RSSI Threshold AP Client Limiting Client Fingerprinting AP VLAN Management VLANs for AP – Multiple SSIDs Secured Guest Network Captive Portal Access Point Status Monitoring Rogue AP Detection Wireless Client Monitoring Background Scanning Auto Transmit Power Auto Channel Email Alert Wireless Traffic & Usage Statistics Real-time Throughput Monitoring SmartSync Redundancy Visual Topology View Floor Plan View Map View Wireless Coverage Display Secure Control Messaging (SSL Certificate) Local MAC Address Database Remote MAC Address Database (RADIUS) Unified Configuration Import/Export Bulk Firmware Upgrade Capability One-Click Update Intelligent Diagnostics Kick/Ban Clients Wi-Fi Scheduler Traffic Shaping

    Configuration

    Web Interface (HTTP) CLI (Telnet)

    Control Features

    Managed Mode (by Neutron Switch/ezMaster) Band Steering Auto-Reboot One-Click Firmware Upgrade Firmware Upgrade: Web Interface or CLI (FTP/HTTP)

    Security

    WEP Encryption (64/128/152 bit) WPA/WPA2 Enterprise (PSK using TKIP or AES) Hide SSID in Beacons MAC Address Filtering, Up to 50 MACs per SSID SSH Support Client Isolation

    Supporting Protocol

    IPv4, TCP, UDP, DHCP, NTP, DNS, DDNS, SMTP, FTP, HTTP, UPnP, NFS/Samba Client, QoS/DSCP, RTP, RTSP, 3GPP, PPPoE, Time Zone Management ONVIF Compatible (Profile S)

    Event Trigger

    Motion/Tamper/Audio Detection

    Event Notification

    Email/Push Notifications

    Event Actions

    File Upload to NFS/SAMBA/FTP/SMT/Local SD Card/EnGenius Cloud & Play Audio EnGenius Simple Smart Recording (Only for EnGenius Cloud Series Routers/Gateways)

    Video Buffer

    5-Seconds Pre-Alarm & Post-Alarm

    Video Playback

    PC/iPhone®/Android™ via EnVMS App

    Viewing System Requirements

    Operating SystemMicrosoft® Windows® 7/10

    Web Browser

    Edge, IE, Safari, Chrome, Firefox, Opera

    Video Management Software

    Microsoft Windows 7/10

    EnVMS Mobile APP

    iOS/Android Devices Live Viewing for Up to 5 Clients

    Temperature Range

    Operating: 32°F to 122°F, 0°C to 50°C

    Humidity (Non-condensing)

    Operating: 80% or less Storage: 80% or less

    EWS1025CAM Device

    Weight: 1.11 lbs. Diameter: 5.27″ (134 mm) Height: 3.81″ (97 mm)

    Package Contents

    – EWS1025CAM – 12V/1.5A Power Adapter – Mounting Bracket – Mounting Screw Set – T-Rail Mounting Kit – RJ45 Ethernet Cable – Quick Installation Guide

    Certifications

    FCC IC

    Block "end-product" not found

    08 797 33133